Home > Tools >

Differential Carrier Bearing Clamshell Puller Kit, AGP20
Differential Carrier Bearing Clamshell Puller Kit
Differential Carrier Bearing Clamshell Puller Kit
  
Clamshell Puller Kit
Our Price: $189.95
Item Condition: New
UPC: 0700537057606
ASIN: 700537057606
Brand: Transolutions


Product Code: AGP20
Qty:

Description Prop 65 Warning
 

Dana 30, 40, 50, 60, 70, GM 8.875"12 Bolt and Ford 9” Differential Bearing Puller Kit


Safely and easily remove axle bearings with this clamshell bearing puller (part# AGP20), and get the best price for this tool found anywhere. This pinion bearing puller set has hardened machined alloy clamshells and high-quality retaining rings and adjusting collar. This carrier bearing puller removes both carrier and pinion bearings and is appropriate for use on most Dana/Spicer solid axles. This includes Dana 30, 40, 50, 60 and 70 axles (differentials) and also Ford 9” differentials. You won't find a higher-quality carrier bearing removal tool at a better price, and our service is friendly and fast. Most orders are shipped within one to two working days of receipt.

Be advised, this Dana 60 carrier removal tool does not work on Dana 80 or Ford 10.25 differentials without a specialized adapter.

Differential Carrier Bearing Clamshell Design Puller Kit. Interchanges with YTP20

Removes Carrier and Pinion Bearings From Most Dana and Ford 9" Differentials.
  • Dana 30
  • Dana 40
  • Dana 50
  • Dana 60
  • Dana 70
  • Ford 9"
Features/FAQs
Removes Carrier and Pinion Bearings From Most Dana and Ford 9" Differentials.
  • Dana 30
  • Dana 40
  • Dana 50
  • Dana 60
  • Dana 70
  • Ford 9"
  • GM 8.875" 12 BOLT

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 32 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Bearing puller November 25, 2023
Reviewer: Dana Spicer from Norcal, USA  
I had always used 2 jaw pullers in the past on differentials, the clamshell works great. Haven't pulled a cage off yet with this setup, fast and simple to use.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Parts September 17, 2023
Reviewer: Mike McDaniel from USA  
Fast shipping & it works very well

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great tool! Great price! September 17, 2023
Reviewer: J.R. from USA  
Excellent tool for anyone doing rear end gear swaps. This tool makes a daunting task that much easier to tackle. Highly recommended for those that do frequent gear swaps.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Worked Well for Dana 44 September 6, 2023
Reviewer: Greg B. from Iowa  
The quality of the kit is very good and the caddy to hold everything works well. I've used this to pull the bearings off my Dana 44 to get my final backlash correct. The only complaint I have is that there's no way to attach a reaction bar to keep it from spinning. I had to use the pipe jaws on my vise and put gouge marks in my shiny new tool. Square tube on the outside of the main body for a pipe wrench, or to hold better in the vise, would make this perfect. It if weren't for that, it'd be 5 stars.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent quality September 6, 2023
Reviewer: Jeff Ramsey from Afton,TN  
Excell ed nt Quality, fast delivery

Was this review helpful to you?

View All Customer Reviews